1111364191 Q * gloobert Quit: 
1111365501 Q * Vudumen Read error: Connection reset by peer
1111365612 J * jd86 ~jim@ip68-9-97-23.ri.ri.cox.net
1111369092 Q * keyser_soze Quit: Abandonando
1111370513 M * ciphernaut does the file dbootstrap_settings (in my home path, from where I normaly build my vservers) have anything to do with the vservers' perl complaining (during package add) about the setting of locale failing?
1111371237 M * ciphernaut base-config
1111371256 M * ciphernaut after all these years of debian
1111371257 M * ciphernaut lol
1111377157 J * kyencer ~kyencer@adsl-156-107-102.asm.bellsouth.net
1111380784 Q * nox Ping timeout: 480 seconds
1111380813 J * nox ~nox@213.39.207.172
1111384332 J * MrX freebsd@219.95.232.121
1111387179 J * atsab ~as@lotes.vtu.lt
1111391634 Q * Hollow Remote host closed the connection
1111392317 J * erwan_ho ~erwan@lns-vlq-39f-81-56-133-136.adsl.proxad.net
1111392846 Q * erwan_ho Remote host closed the connection
1111397116 J * erwan_taf ~erwan@81.80.43.68
1111399687 J * jsambrook ~jsambrook@aelfric.plus.com
1111400325 Q * flock Quit: Expert, n.:  Someone who comes from out of town and shows slides.
1111400361 J * flock ~restless@l192-117-111-12.broadband.actcom.net.il
1111401185 J * Schak schak@dsl-213-023-234-187.arcor-ip.net
1111401329 M * Schak morning... got a problem... /proc is missing on all my vservers... mount doesnt work... and i havent this magic programm called vproc... kernel&vserver version: 2.6.10-vs1.9.3.14
1111401364 M * rs hi there
1111401424 M * Schak i have inserted in /etc/vservers/xxxx/fstab the correct proc line, but this does not help either
1111401580 M * Loki|muh did you execute vprocunhide?
1111401596 M * Doener Schak: tools version?
1111401611 A * Doener places a bet on distro being debian ;)
1111401614 M * Doener scnr
1111401717 M * Schak util-vserver-0.30.196 ... debian... your are right... but... no deb!... self-built! ;)
1111401724 M * Schak -r
1111401725 M * Doener hehe, ko
1111401729 M * Doener s/ko/ok/
1111401821 M * Doener you should have vprocunhide in either /usr/local/etc/init.d/ (default) or /etc/init.d/ or something (depends on you configuration for the tools)
1111401825 M * Schak [11:40:49] <Loki|muh> did you execute vprocunhide? <-- no... shall i?
1111401847 M * Schak yes... vprocunhide i have found
1111401849 M * Doener btw, there's a util-vserver-0.30.204 in experimental
1111401858 M * Doener that one should be ok as well
1111401863 M * Doener http://linux-vserver.org/Proc-Security
1111401877 M * Doener IIRC the page should mention vprochunhide ;)
1111401980 M * Schak oh... please kick me... a simple /etc/init.d/vprocunhide start and everything works... wow... 
1111402044 M * Doener no need to worry, we see this 'problem' on a regular basis ;)
1111402088 M * Schak thx ;)
1111402121 M * Doener you're welcome
1111402379 M * Schak can i put a link vom /etc/init.d/vprocunhide to /etc/rc?.d/ although the vservers are not running at this moment?  (= if i reboot the host machine... this vprocunhide script would be executed earlier than the vservers are started... does this work?)
1111402411 M * Doener Schak: yep, the settings are global
1111402420 M * Schak ah ok
1111402422 M * Schak fine
1111404652 J * Vudumen vudumen@perverz.hu
1111405928 J * Pazzo ~thomas@host130-250.pool8172.interbusiness.it
1111408296 Q * Schak Ping timeout: 480 seconds
1111408467 Q * nox Quit: I shouldn't really be here - dircproxy 1.0.5
1111408496 J * nox ~nox@213.39.207.172
1111409254 Q * erwan_taf Remote host closed the connection
1111413617 J * keyser_soze ~keyser@host135.201-252-26.telecom.net.ar
1111416070 J * keyser_soze_ ~keyser@host82.201-252-44.telecom.net.ar
1111416451 Q * keyser_soze Ping timeout: 480 seconds
1111417191 Q * Loki|muh Read error: Connection reset by peer
1111417479 J * Loki|muh loki@satanix.de
1111417966 Q * keyser_soze_ Quit: Abandonando
1111418178 M * DaPhreak Doener: ?
1111418193 M * Doener yeah?
1111418323 M * DaPhreak well i currently try to setup qemu ;P and i'm figuring out how Bertl set up his images .. maybe you've an idea :) he did some `sfdisk -S 63 -H 16 -C 1038 imagefile.img`; but i don't know how to adapt the cylinders ... for an other image size
1111418433 M * Doener no, i don't know, i asked Bertl back then, but later i switched to the way that's described on the qemu homepage and installed debian from qemu-cd (using an iso image on the host)... it's been incredibly slow to install, but at least i got it working :)
1111418482 M * DaPhreak yeah :) okee .. gonna try to install a gentoo via bootcd and with my prepared snapshot :)
1111418520 M * DaPhreak described means qemu-img ? .. i've read the log :)
1111418555 M * DaPhreak thanks a lot Doener ;)
1111418560 M * DaPhreak <-- home ..
1111418562 M * Doener hm, no idea, didn't do it again :)
1111418565 M * Doener cya
1111418594 N * DaPhreak DaPhreak|detach
1111418791 J * ridan ~ridan@nadirb.xs4all.nl
1111418791 P * ridan 
1111419072 M * alexx hello Doener, do you know some issue about qmail under vserver ?
1111419100 M * Doener no, at least i don't remember any, i don't use qmail myself
1111419123 M * alexx on the ml archive, i see : "no pb"
1111419127 M * alexx but, i have one :(
1111419133 M * alexx a the production server (:
1111419134 M * alexx :(
1111419136 M * Doener what is it?
1111419154 M * Doener my crystal ball is broken atm ;)
1111419202 M * alexx i start it, it manage the queue, then, do nothing
1111419216 M * alexx mail can arrive, it's stored
1111419219 M * alexx but no log
1111419231 M * alexx on a qmail restart, all mail are delivered
1111419269 M * Doener hm, interesting... but i don't have the slightest idea what might be going on there...
1111419296 M * alexx i know that qmail work with a lot of signal
1111419308 M * alexx do you know some issu on signal perhaps ?
1111419319 M * Doener which vserver patch version?
1111419324 M * alexx 1.9.4
1111419351 M * Doener hm, no, that should have the signal isse fixed
1111419377 M * Doener was fixed somewhere between 1.9.2 and 1.9.3 IIRC
1111420422 M * alexx hum, another pb, i've put the fakeinit flag, but, inside vserver, i haven't init process 
1111420622 J * keyser_soze ~keyser@host82.201-252-44.telecom.net.ar
1111420794 Q * keyser_soze Quit: 
1111420801 J * keyser_soze ~keyser@host82.201-252-44.telecom.net.ar
1111420882 M * alexx prehaps a missing devices ...
1111420900 M * alexx i have no idea where to search a solution :/
1111421105 Q * keyser_soze Quit: Abandonando
1111421691 J * pulsar ~pulsar@82.209.246.234
1111421706 M * pulsar hi all
1111421882 Q * eyck Ping timeout: 480 seconds
1111422168 M * Pazzo 'n abend - hi all!
1111422267 M * Pazzo samba in a vserver runs great, BUT... what about browsing? doesn't seem to work, even with too many BCAPS :-(
1111422291 M * Pazzo anyone running a full-featured PDC within a vserver?
1111422953 M * pulsar I can't change value in /proc/sys/kernel/random/poolsize ... , but in vanila kernel can. Is this vserver issue ?
1111423204 J * erwan_taf ~erwan@81.80.43.68
1111423753 J * eyck eyck@81.219.64.71
1111423983 Q * MrX Write error: connection closed
1111424932 Q * pulsar Quit: Leaving
1111426029 N * Bertl_zZ Bertl
1111426039 M * Bertl evening folks!
1111426044 M * alexx Bertl, ! :)
1111426404 J * Loki_muh loki@satanix.de
1111426408 Q * Loki_muh Quit: 
1111426590 M * Pazzo hi bertl!
1111426614 M * alexx Doener, i've found my qmail pb ! :)
1111426628 M * Bertl evening Pazzo! alexx!
1111426637 M * Doener alexx: great!
1111426638 M * alexx a fifo file not present after rsync
1111426641 M * Pazzo alexx: did you discover postfix? ;-)
1111426642 M * Doener evening Bertl!
1111426651 M * Doener Pazzo: *g*
1111426657 M * alexx Pazzo, i instrall postfix on fresh debian install
1111426672 M * alexx but, this is an old RH7.2 with a log of users ;)
1111426672 M * Pazzo bertl: (17:24:27) Pazzo: samba in a vserver runs great, BUT... what about browsing? doesn't seem to work, even with too many BCAPS ... (17:24:51) Pazzo: anyone running a full-featured PDC within a vserver?
1111426680 M * Pazzo bertl: any idea?
1111426742 Q * eyck Ping timeout: 480 seconds
1111426756 M * Pazzo alexx: I was running rh7.2 with qmail some time ago - uptime 1024 days, then I remotely installed sarge, vserver-kernel & postfix - that was like eastereggs and christmas in only one day ;-)
1111426800 M * alexx Pazzo, great :)
1111426848 M * Pazzo alexx: so what was your qmail problem?
1111426864 M * alexx the trigger file in queue
1111426871 M * Bertl Pazzo: have a look at the irc logs, IIRC the issue was that you have to assign the broadcast address too, so that it can broadcast the junk^Wshare information
1111426873 M * alexx it's a fifo 
1111426905 M * Pazzo bertl: how are broadcasts handled by vserver kernels? are they passed to every vs? and what is CAP_NET_BROADCAST needed for? any docs?
1111426905 M * alexx and after rsync the real server on vserver ... the trigger fifo file has not been sync
1111426971 M * Bertl see include/linux/capability.h (for the CAP question)
1111426979 M * Pazzo thnx bertl!
1111426991 M * Bertl and broadcasts are not handled any special, so if you have the broadcast ip, then you can broadcast
1111427001 M * Bertl (or listen to broadcasts)
1111427009 J * eyck eyck@81.219.64.71
1111427026 M * Bertl wb eyck!
1111427029 M * Pazzo but I have to add the broadcast ip to the vserver?
1111427037 M * Bertl yep
1111427076 M * Pazzo ok, thnx. capability.h says: Allow broadcasting, listen to multicast
1111427089 M * Pazzo so no broadcasting without this bcap?
1111427257 P * click [IRSSI]
1111427525 M * Pazzo bertl: works! machine account creating failed while joining the domain, but that's for sure because I was messing up the whole ldap/samba config this afternoon while trying to find out the problem :-(
1111427621 M * Pazzo I don't really like this "adding-broadcast-ip-thing"... but for now it works, its just a test environment.
1111427668 M * Pazzo thank you bertl! I'll go for dinner now, cu l8er!
1111427675 M * Pazzo bye all!
1111427680 N * Pazzo PazZzzzooo
1111428185 M * Bertl cya
1111428399 J * monrad ~monrad@213083190130.sonofon.dk
1111428443 M * Bertl welcome monrad!
1111428916 M * monrad hi
1111429782 M * alexx Bertl, do you know some issue with fakeinit ?
1111429853 M * alexx with vs1.9.4 and flag "fakeinit" up, i haven't init process into vserver
1111429877 M * alexx i must create e fifo on /dev/initctl ?
1111429916 J * virtuoso ~s0t0na@tranq.dorms.spbu.ru
1111429924 M * Bertl which config style?
1111429932 M * alexx new
1111429957 M * Bertl okay, and init style?
1111430038 M * alexx hum ....; nothing
1111430051 M * alexx i don't understand what the config want for that
1111430109 M * alexx what is the option for init style ?
1111430110 M * Bertl sec
1111430116 M * alexx oki :)
1111430131 M * Bertl you know the flower page by now?
1111430144 M * alexx ho yes ;)
1111430153 M * alexx the unseeable page ;)
1111430200 M * Bertl * /etc/vservers/vserver-name/apps/init 
1111430225 M * Bertl #  style
1111430225 M * Bertl Contains the init-style.
1111430244 M * alexx i'm ok ...
1111430254 M * Bertl this is probably sysv right now either explicit or via default)
1111430304 M * alexx is exist a configuration to work with /etc/inittab file ?
1111430346 M * Bertl you can change it to minit or plain there ...
1111430360 M * Bertl sysv will just execute the runlevel scripts ...
1111430368 M * alexx is there a diff in security ?
1111430390 M * Bertl well, one runs a real init process ... the other saves the resources but just starting the services ;)
1111430462 M * alexx i need to work with inittab file ... so, i test plain :) thanks for explaination
1111430483 M * Bertl you're welcome!
1111430567 J * click click@dsl-static-122-208.aal.tiscali.no
1111430609 M * Bertl wb click!
1111431250 M * Bertl any debian folks around here?
1111431316 M * DaCa hi Bertl 
1111431681 M * alexx Bertl, with plain init-style, it's start service indicated in /etc/inittab ... isn't it ?
1111431707 J * pulsar ~pulsar@213.184.238.34
1111431766 M * pulsar Hi ! Does dnyone know why random pool resizing sysctl was removed on 2.6.11 ?
1111431770 M * Bertl evening DaCa! pulsar!
1111431795 Q * grecea Read error: No route to host
1111431845 M * Bertl alexx: yes, IIRC (I always use sysv)
1111431899 J * erwan_ho ~erwan@lns-vlq-39f-81-56-133-136.adsl.proxad.net
1111431906 M * Bertl evening erwan!
1111431912 J * grecea ~grecea@h-195-22-237-74.mdl.net
1111431932 M * Bertl wb grecea!
1111431947 M * alexx Bertl, i don't understand ... i've restart with plain, but juste 2-3 service have started
1111431958 M * erwan_ho hey Bertl 
1111431965 M * erwan_ho Bertl: what's up ?
1111431965 M * alexx otherwise manual start succes
1111432036 M * Bertl erwan_ho: trying to find someone who knows jigdo (or a good way to get debian cds ;)
1111432071 M * Zoiah Bertl: what's your problem with it?
1111432095 M * Bertl well, it says jigdo: and now I'm reading the mini howto ;)
1111432097 M * Zoiah Bertl: and also: http://cdimage.debian.org/debian-cd/torrents/
1111432147 M * Bertl no thanks I don#t like torrent ... where do I get the jigdo distro files and templates?
1111432175 M * Bertl ah, found it ...
1111432195 M * Zoiah http://debian.inode.at/debian-cd/
1111432259 M * Bertl hmm, why do I have sarge-sparc-1.jigdo - sarge-sparc-12.jigdo, does that mean 12 images?
1111432300 M * Zoiah Yup.
1111432307 M * Zoiah That's the entire debian distro.
1111432316 M * Bertl debian requires 12 CDs for a sarge isntall?
1111432320 M * Zoiah A full install, yes.
1111432340 M * Zoiah It's usually adviced to do a netinstall.
1111432348 M * Zoiah But for regular installations you don't need more than 1 CDs.
1111432376 M * Bertl okay, a net isntall would take about a week, so I'd like a 1-3 cd version ;)
1111432424 M * Zoiah You only need the first CD for a base installation.
1111432443 M * Bertl okay, so using the jigdo image 1 should work?
1111432446 M * Zoiah Yup.
1111432471 M * Bertl I thought the jigdo was supposed to figure the 'required# packages?
1111432496 M * Zoiah Jigdo downloads all packages necessary for the image from a mirror and then builds an image from that.
1111432515 M * Bertl so I can run into strange dependancies later, eh?
1111432560 M * Zoiah Well, depends on what you want to install.
1111432578 M * Zoiah I usually just install from CD #1 and then apt-get from the internet whatever extras I need.
1111432583 M * Bertl I would like to get a running system with sshd where I can compile some stuff ;)
1111432590 M * Zoiah That should be doable with CD1.
1111432591 J * yarihm ~yarihm@217-162-112-45.dclient.hispeed.ch
1111432619 M * Bertl evening yarihm!
1111432639 M * Bertl Zoiah: okay, so I go for the sarge-sparc-1.jigdo/template, right?
1111432644 M * yarihm hi Bertl, my favourite kernel hacker :)
1111432652 M * Zoiah Bertl: yup.
1111432671 M * yarihm Bertl: going to install Debian or what?
1111432721 M * Bertl of course ... I have to check it out .. right?
1111432930 M * yarihm sure ... what did you run before then?
1111432954 M * yarihm Debian is my favourite, there are nice vservertools, too :)
1111433033 M * Bertl yeah, I especially like the extra support time we do for debian issues :P
1111433104 M * Bertl yarihm: I'm still using mandrake wherever possible ... it's a self compiled version which works out of the box ;)
1111433594 M * yarihm :)
1111433609 M * yarihm why, what's special with debian/vserver?
1111433651 M * yarihm Bertl: I expected you to use SuSE - coming from austria ... 
1111433682 M * Bertl the maintainance of course ;) no last known good SuSE was 6.3 ;)
1111433690 M * Zoiah SuSE is insane. :)
1111433712 M * Zoiah I've worked with SuSE Linux Enterprise Server for a year. Pure horror. :)
1111433909 J * brc bruce@200.164.156.71
1111433930 M * Zoiah Bertl: about your mail to the mailinglist about name-based vservers. I don't think this is possible with ftp servers.
1111433973 M * Zoiah Perhaps you could embed some virtualhost in the username though.
1111434041 J * Tbery ~tb@84.242.127.4
1111434042 M * Bertl yes, I didn't mention that explicitely, we had (some years ago) user@domain as logon
1111434050 M * Tbery Hi Bertl 
1111434055 M * Bertl evening Tbery!
1111434069 M * Tbery I have still troble with 2.6.10
1111434075 M * Tbery a vserver
1111434092 M * Bertl yep, please elaborate ...
1111434130 M * Tbery vserver min start
1111434131 M * Tbery /usr/sbin/vserver: line 27: : není souborem ani adresářem
1111434131 M * Tbery Can not find a vserver-setup at '/min/'.
1111434131 M * Tbery Possible solutions:
1111434131 M * Tbery * fix the spelling of the 'min' vserver name
1111434131 M * Tbery * read 'vserver min build --help' about ways to create a new vserver
1111434133 M * Tbery * see 'vserver --help' for the syntax of this command
1111434137 M * Tbery mail:~#
1111434191 M * Bertl first step is to use LANG=C LC_ALL=C (so we can read the error messages)
1111434222 M * Bertl then, it looks like you reference a vserver in the root '/' path?
1111434229 M * Tbery vserver min start
1111434229 M * Tbery /usr/sbin/vserver: line 27: : No such file or directory
1111434229 M * Tbery Can not find a vserver-setup at '/min/'.
1111434229 M * Tbery Possible solutions:
1111434229 M * Tbery * fix the spelling of the 'min' vserver name
1111434231 M * Tbery * read 'vserver min build --help' about ways to create a new vserver
1111434232 M * Tbery * see 'vserver --help' for the syntax of this command
1111434234 M * Tbery mail:~#               
1111434262 M * Tbery is create by newvserver from 204
1111434272 M * Tbery yes
1111434290 M * Tbery yes /vservers
1111434309 M * Tbery ln -s 
1111434375 M * Bertl well, util-vserver 0.30.204 has no newvserver AFAIK ;)
1111434397 M * Tbery on debian is..
1111434416 M * Tbery unstables packages
1111434426 M * Bertl yarihm: see what I mean?
1111434484 M * Bertl Tbery: you have to complain to the package maintainer about that ... it's not even part of the util-vserver tools ;)
1111434618 M * yarihm Bertl: hmm ... i see ... :) for me util-vserver always worked ... unstable isn't meant to be working all the time as already the name suggests.
1111434628 M * yarihm Tbery: try reporting a bug via bts
1111434660 M * Tbery /usr/sbin/vserver: line 27: : No such file or directory
1111434660 M * Tbery Can not find a vserver-setup at '/min/'.
1111434660 M * Tbery Possible solutions:
1111434660 M * Tbery * fix the spelling of the 'min' vserver name
1111434661 M * Tbery * read 'vserver min build --help' about ways to create a new vserver
1111434662 M * Tbery * see 'vserver --help' for the syntax of this command
1111434664 M * Tbery mail:~#         
1111434680 M * Tbery and server is alerady make 
1111434737 M * Bertl Tbery: my suggestion is: get the util-vserver-0.30.204 tar ball, compile it, and use vserver <name> build ... to create the vserver ...
1111434758 M * Bertl this is known to work and we are able to help you with issues there ...
1111434768 M * Tbery no with deb source 204 
1111434779 M * Tbery and this source have newvserver
1111434784 M * Tbery util
1111434791 M * Bertl I have no idea what debian folks changed there and you have to ask them about issues ...
1111434812 M * Tbery yarihm, can you help me??
1111434821 M * Bertl (we can not support all kind of distros when they change the tools and kernels)
1111434831 M * Tbery if is tboule I will install older package..
1111434905 M * Tbery 196 for debian I have..
1111434922 M * yarihm Tbery: well, if /usr/sbin/vserver is a shellscript (as it seems to be) you can check line 27 and look what's wrong ... 
1111434930 M * Bertl well, the same applies to that, if it works for you, fine, if not, you have to ask debian folks ...
1111434931 M * Tbery but this package already running on machine with 2.6.8 kernel..
1111434947 M * yarihm I don't have unstable on machines where i use vserver, I use a backport of branden's vserver-tools ... 
1111434986 M * Tbery  ${UTIL_VSERVER_VARS:=/usr/lib/util-vserver/util-vserver-vars}
1111434987 M * Tbery test -e "$UTIL_VSERVER_VARS" || {
1111434987 M * Tbery     echo $"Can not find util-vserver installation (the file '$UTIL_VSERVER_VARS'
1111434987 M * Tbery     exit 1
1111434987 M * Tbery }
1111434987 M * Tbery . "$UTIL_VSERVER_VARS"
1111434988 M * DaCa newvserver is in vserver-debiantools
1111434989 M * Tbery . "$_LIB_FUNCTIONS"
1111435007 M * Tbery yes
1111435165 M * yarihm Tbery: well, I don't know what exactly is going on there, seems like you don't have this file /usr/lib/util-vserver/util-vserver-vars or something the like ... branden robinson is AFAIK responsible for util-vserver, you might find him somewhere here on IRC, otherwise just report a BUT if you are sure that it's not your fault it's not working
1111435177 M * yarihm s/BUT/BUG :)
1111435188 M * Tbery ok
1111435195 M * yarihm s/BUG/but even ... 
1111435202 M * Bertl  yarihm hmm, who is branden robinson ?
1111435222 M * yarihm i think he's the maintainer of the debian vserver-tool-stuff
1111435232 M * yarihm the package maintainer that is
1111435240 M * Bertl that's new, last time I checked it was Ola Lundquist
1111435253 M * yarihm IIRC ... lemme see :) maybe i'm fscking up
1111435257 M * DaCa Bertl: branden is the xfree86 maintainer
1111435264 M * yarihm could be lundquist too ... 
1111435269 M * DaCa vserver packages are from ola yes
1111435278 M * yarihm DaCa: and now running for DPL?
1111435291 M * DaCa yarihm: as each year :)
1111435299 M * yarihm then that's what i was confused by
1111435317 M * yarihm DaCa: heh :) well, this year he wanted 100 maints to back him up
1111435327 M * yarihm at least a little ,)
1111435372 M * yarihm DaCa: who do you think is going to become DPL? after the arch-disastre / vancouver-meeting ... 
1111435408 M * yarihm I think i even go to helsinki look what and how they are discussing :D
1111435547 M * DaCa yarihm: if I would be a DD I would vote for stockholm, but I think that mjg59 has more chances to win
1111435602 M * yarihm DaCa: who is stockholm?
1111435623 M * DaCa yarihm: I'll be in .fi too, debconf is great, I was at debconf1, 3 and 4
1111435658 M * DaCa yarihm: andreas schuldei
1111435689 M * yarihm hmm ... I'm not sure whether it is during the semestre, but if i can spend the money, why not. helsinki wouldn't be a city i'd go for, but hey, maybe it's fun seeing those people one only knows from irc and the mailinglists
1111435725 M * yarihm DaCa: schuldei is the guy with the pic of his son on the platform? he seems to be very sympathic ...
1111435757 M * Bertl hmm, well, it's getting a little offtopic I guess ... not sure folks are that interested when browsing the logs ... ;)
1111435776 M * DaCa true
1111436097 M * yarihm yo, sorry
1111436680 M * Bertl np
1111436835 M * matti Huh.
1111436864 M * matti Bertl: ;]
1111436915 M * Bertl `:]
1111436920 J * Llama ~bogdan@gate113.iba.by
1111436927 M * Llama hiall
1111436928 M * Bertl evening Llama!
1111436930 N * DaPhreak|detach DaPhreak
1111436938 M * DaPhreak evening folks!
1111436944 M * Bertl wb DaPhreak!
1111436975 M * DaPhreak lets start to do some damage in cvs
1111436975 M * Llama Where I could find complete description of "new" vserver config format ?
1111437053 M * Bertl on the flower page or in your util-vserver source
1111437079 M * Bertl http://www-user.tu-chemnitz.de/~ensc/util-vserver/doc/conf/configuration.html
1111437095 M * Llama ooohhhhh
1111437106 M * Llama cannabis...
1111437264 M * Llama Bertl, 
1111437291 M * Bertl hmm?
1111437338 M * Llama thnx ;)
1111437410 M * albeiro i always wondered why is it flower page ;]
1111437552 M * Bertl Llama: you're welcome! 
1111437656 M * Bertl albeiro: because of the small white flowers, why?
1111437712 M * albeiro just wondering
1111437846 Q * Llama Ping timeout: 480 seconds
1111439269 P * pulsar Leaving
1111441222 Q * Vudumen Ping timeout: 480 seconds
1111441418 J * Vudumen vudumen@perverz.hu
1111441431 N * DaPhreak DaPhreak|detach
1111442796 Q * Tbery Quit: Ukončuji
1111443523 Q * erwan_ho Quit: Leaving
1111443903 J * ensc ~ircensc@ultra.csn.tu-chemnitz.de
1111444155 J * keyser_soze ~keyser@host82.201-252-44.telecom.net.ar
1111444161 M * Bertl evenin ensc!
1111444174 M * ensc hi
1111444183 M * Bertl good to see you again! ;)
1111444626 J * kalou ~kalou@AToulon-201-1-24-2.w80-13.abo.wanadoo.fr
1111444632 M * kalou Hi all
1111444635 M * Bertl evening kalou!
1111444644 M * kalou :) 'evening Bertl
1111444818 M * kalou I'm trying to resolve a network problem on 2.4.29-vs1.2.10 tonight ... (connect returns EINVAL)
1111445013 M * Bertl interesting, any logs?
1111445145 M * kalou hmm. ok I launched the vserver on eth0, and IP=192.168.24.3, but this ip was non-existant on eth0 nor on another virtual interface.
1111445183 M * kalou put 192.168.24.3 on eth0:1 and restarted the vserver, now connect works.
1111445203 A * kalou is blushing ..
1111445224 M * kalou Still unable to find any bug in vserver 1.2.10 :)
1111445244 M * Bertl hehe
1111445327 M * kalou I began to read the chapters about vserver syscall, the multiplexer for syscall, etc.... Nice introduction to the kernel. 
1111445446 M * albeiro kalou: link ?
1111445483 M * Bertl albeiro: the vserver paper I guess ;)
1111445489 M * albeiro ;p
1111445763 M * kalou albero: yep, that's here: http://linux-vserver.org/Linux-VServer-Paper-11
1111445855 M * albeiro thx
1111445876 M * albeiro queued but with highest priority
1111445887 M * albeiro read - will take it tonight ;]
1111445934 M * Bertl LOL
1111446008 M * albeiro the more i read about syscalls the better
1111446025 M * albeiro i am currently debuging some verid crash in other project ;]
1111446252 M * Bertl userspace or kernel space?
1111446288 M * albeiro kernel space invoking some syscalls
1111446292 M * albeiro gr
1111446295 M * albeiro user space that's it ;]
1111446367 M * Bertl yeah, well, most userspace involves some syscalls ...
1111446406 M * albeiro i supose so ;]
1111446417 M * albeiro i will flood a bit if you do not mind ;]
1111446421 M * albeiro few lines
1111446443 M * Bertl pastebin.com?
1111446453 M * albeiro ok
1111446470 M * albeiro i forgot address nothing else ;]
1111446500 M * albeiro http://pastebin.com/261122
1111446522 M * albeiro that's what i am trying to figure out. not having too much experience in syscalls thought
1111446548 M * albeiro so no idea how should i decrypt those
1111446716 M * Bertl well, 224 seems unknown to your strace ...
1111446731 M * albeiro yeah. as well as to me
1111446777 M * albeiro i wonder how could i know which syscall it is and parametrs it was invoked with in human form.
1111446866 M * Bertl  SYS_224(0x10204, 0x4d, 0x7fffd390, 0x100, 0xff573f8) = 0
1111446890 M * Bertl that means syscall with number 224, look in your unistd.h file (for that arch) which syscall has 224
1111446920 M * Bertl the arguments are 5 integers (as far as the tracer knows)
1111446924 M * Bertl and it returns 0
1111446977 M * albeiro ok, 224 is my our (project) syscall
1111447005 M * Bertl that explains why it is not known to strace ;)
1111447032 M * albeiro yeah. but now how can i decrypt parameters ?
1111447080 M * albeiro (it is multiplexed syscall)
1111447217 M * Bertl well, best is to modify/extend the strace tool
1111447231 M * Bertl (I did a patch for vserver syscall, you can look at that)
1111447271 M * albeiro sounds good. is it in vserver utils ?
1111447285 M * Bertl http://vserver.13thfloor.at/Experimental/TOOLS/delta-strace-4.5.1-vserver.diff
1111447424 M * albeiro thx ! it will be a while till i implement something like this but looks kind of usefull.
1111447473 M * albeiro no wonder debuging is a <insert whatever here> ;]
1111447769 Q * keyser_soze Quit: Abandonando
1111447860 J * keyser_soze ~keyser@host82.201-252-44.telecom.net.ar
1111447992 M * Bertl okay folks, enough for me for tonight ... cya tomorrow!
1111448032 Q * keyser_soze Quit: 
1111448034 N * Bertl Bertl_zZ
1111448223 J * prae ~prae@sherpadown.net
1111449491 Q * yarihm Quit: Leaving